Re: intel rst stopped working (11.2.0.1006)
forgot about that parameter, because the OS booted as it did before the update.the last time i swited it to raid, i had to clear install the OS (w7). after rebooting in raid-mode, the system recognized...
View ArticleRe: intel rst stopped working (11.2.0.1006)
vang124578 schrieb: forgot about that parameter, because the OS booted as it did before the update.the last time i swited it to raid, i had to clear install the OS (w7).after rebooting in raid-mode,...
View ArticleRe: intel rst stopped working (11.2.0.1006)
stil working on data and system recovery lost lots of data by switching too raid-mode in bios,later turned back to AHCI mode so i could install a datarecovery programreturning in windows didn't trigger...
View ArticleRe: intel rst stopped working (11.2.0.1006)
vang124578 schrieb: at this point i don't know what the dohow do i solve the checkdsk errors?do i have disable the raid and enable is again?can make a raid configuration based on a filled hdd?If I...
View ArticleVT-d hardware support on chipsets Z87 and H87
Hello,I'm confused about VT-d support on chipsets Z87 (DH82Z87) and H87 (DH82H87).This document Compatibility with Intel® Virtualization Technology (Intel® VT)...
View ArticleRe: intel rst stopped working (11.2.0.1006)
I have a ssd drive with the OS, and two hdd in raidthis will be the reason why my OS still worked, in RAID and in AHCI, and mij RAID configuration didn't the OS isn't on the RAID, so is a reinstall...
View ArticleRe: intel rst stopped working (11.2.0.1006)
vang124578 schrieb: I have a ssd drive with the OS, and two hdd in raidthis will be the reason why my OS still worked, in RAID and in AHCI, and mij RAID configuration didn'tthe OS isn't on the RAID, so...
View ArticleRAID 10 Drive Set Not Viewable by Win 7 Pro, Can't Load RAID Driver
First, I need to say that I am a complete newbie here and I'll apologize in advance for any blunders. I'll also greatly appreciate any advice that can get me moving again. Here is my component list....
View ArticleRe: RAID 10 Drive Set Not Viewable by Win 7 Pro, Can't Load RAID Driver
Hi zancek0, There are some steps to take before setting the system up for RAID. Make sure the chipset mode has been changed to RAID mode at the BIOS level.Configure the raid with the CTR-I. You can...
View ArticlePCIe not working on Haswell Q85 platform
Hello, I have upgraded to a new haswell Q85 platform and my PCIe-to-PCI Bridge had stopped working, the system can't boot up. My board with the PCIe-to-PCI works just fine with my older Q77 platform.Is...
View ArticleRe: RAID 10 Drive Set Not Viewable by Win 7 Pro, Can't Load RAID Driver
Thanks, Kevin. I omitted mentioning the BIOS CTR-I step. I had completed that successfully prior to loading the OS. In fact, the CTR-I went very smoothly. I also downloaded and printed the PDF user...
View ArticleRe: VT-d hardware support on chipsets Z87 and H87
Let me further investigate on this and get back to you with the correct answer for this.
View ArticleRe: PCIe not working on Haswell Q85 platform
If this is a branded or wholesale computer, you need to check directly with your computer or motherboard manufacturer in order to troubleshoot this issue. If you are using this controller, building and...
View ArticleRe: intel rst stopped working (11.2.0.1006)
i'm ready searching and recovering data.now i want to reconfigure the raid. i'v set the bios to AHCI, and disconnected one drivethe os (win7) works fine i have to format some partitions on the disk,...
View Articlein-place upgrade RAID1 ICH10R to Win7?
I currently have a Vista x64 system running RAID1 on a ICH10R (P45) motherboard. I would like to execute an in-place upgrade to Win7. Is this possible? Will the Win7 upgrade process either support...
View ArticleRe: RAID 10 Drive Set Not Viewable by Win 7 Pro, Can't Load RAID Driver
Hi Matt42,So, let me recap and confirm information:At this point the RAID has been created under the CTRL-I, correct?If so, Did you already install the operating system? Is the IRST installed? If so,...
View ArticleRe: Windows 8 unable to detect eSATA drive connected to Intel SATA Controller
I have the exact same problem with my external HDD. The HDD is detected in BIOS and AHCI is enabled everywhere. Without Rapid Storage Technology installed, it is detected in other devices but driver...
View ArticleRe: RAID 10 Drive Set Not Viewable by Win 7 Pro, Can't Load RAID Driver
Hello Kevin. Picking up here,--RAID was created under the CTRL-I.--The IRST drivers were not loaded during the OS installation.--Windows 7 Pro was loaded.--Drivers were downloaded as ZIP files.--RAID...
View ArticleRe: Windows 8 unable to detect eSATA drive connected to Intel SATA Controller
1. What is the model of the computer/motherboard you are using?2. What is the model of the external drive being used?3. What is the model of the chipset/controller installed in your system?4. What is...
View ArticleRe: in-place upgrade RAID1 ICH10R to Win7?
Microsoft* Windows* 7 has support for the ICH10R so in that case, there would be no need for drivers during the upgrade.If you have further questions related to the operating system upgrade you should...
View Article