Re: How can I manually unmark my RAID5 array as "rebuilding"? Intel X79/Asus...
Booting my computer today, resigned to the idea of wiping and building a new RAID5 and installing windows from scratch, I noticed that my array now appears as "Rebuilding". Unfortunately, Windows 7...
View ArticleClik here to view.
Re: USB 3.0 external Hard Drive not detected after computer starts up, USB...
Hi all, I also encountered the same USB 3.0 issue. Recently I have bought a brand new HP Probook 470 G2 Laptop and windows 8.1 64bit. Every time I will to connect my old Seagate FreeAgent GoFlex 500GB...
View ArticleRe: USB 3.0 external Hard Drive not detected after computer starts up, USB...
Littlemic I think it must be a compatibility issue between the Intel controller and Seagate external drives. My Chipset is Z97 but Gigabyte uses the Intel controller version 3.0.0.16 and it works for...
View ArticleRe: USB 3.0 external Hard Drive not detected after computer starts up, USB...
I have tried to send the HP probook 470 G2 to HP service center. They commented that it is due to the in-compatible in between the chipset from intel and the Seagate FreeAgent Goflex, how come intel...
View ArticleRe: management engine interface code 10.
Battery reset didn't help. problem is not in battary. cause, eaven when i start laptop with out battary, it turning on,working for 0.5-1.5 sec. after turning off and after again starts up but fullly.
View ArticleRe: Hard Disk Shutdown bug which drivers 12.x.x.xxxx in Z77
Hi beisat, Thanks you for your feedback. Please try running the latest Intel® Rapid Storage Technology from our Computer Manufacture. Kevin M
View ArticleRe: How can I manually unmark my RAID5 array as "rebuilding"? Intel X79/Asus...
Nobox, if the operating system was installed into the RAID 5, this is a common behavior when a system file is missing or corrupted. It will be necessary to set the SATA mode on RAID before trying to...
View ArticleRe: HDD click (excessive load-unload cycles)
Please let me know if this issue happens after a clean installation of version 13.2.4.1000https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24293
View ArticleRe: How can I manually unmark my RAID5 array as "rebuilding"? Intel X79/Asus...
The SATA mode in my UEFI BIOS was already set to RAID (as it has been since I started using the Intel motherboard RAID). Since I couldn't get Windows 7 to boot from the array, I decided that I would...
View ArticleRe: How can I manually unmark my RAID5 array as "rebuilding"? Intel X79/Asus...
BTW, I thought I would mention that I was able to bring the array up when I was in Ubuntu. I mounted the array volume and was able to access all the files I had saved on the array (I played a decent...
View ArticleClik here to view.
Re: HDD click (excessive load-unload cycles)
APM enabled with the newest 13.2.4.1000 drivers I'll downgrade again to 12.9 tomorrow
View ArticleRe: How can a RAID5 ICH10R array be repaired when IRST ignores requests to...
The problem was corrected with a zero write. Intel's RST should indicate that drives need to meet a size requirement. There is no purpose in offering drives smaller. It is poor programming.
View ArticleRe: Hard Disk Shutdown bug which drivers 12.x.x.xxxx in Z77
Hi Kevin,as I said in some older posts I am unable to use 13.x versions of the drivers due to a big problem. When I install these driver versions my HDD disks (2x Samsung HD103SJ with RAID 0 and RAID 1...
View ArticleRe: Suspected Compatibility issue between Datalogic Heron D130 barcode...
hi Siba, i have exactly the same issue with yours, with the only difference is that i have it with Dell Computer, of course it is a new pc , with windows7 64Bit, and i belive that our problem with the...
View ArticleRe: management engine interface code 10.
Woedzer, you may want to check this link for additional troubleshooting on this error code....
View ArticleRe: Suspected Compatibility issue between Datalogic Heron D130 barcode...
Thanks for your reply good to hear that I'm not alone with this problem I havn't got any other solutions regarding this issue we have. I also suspect the USB 3.0 port chipset but there is no difference...
View ArticleRe: How can I manually unmark my RAID5 array as "rebuilding"? Intel X79/Asus...
I am glad that at least you were able to access all files from array.
View ArticleError code: 0x4E24 (20004) Trying to update to latest RST driver on HP xw8400...
In preparation to move a RAID 1 to a larger drive, I was trying to install the latest driver of Rapid Storage Technologyand received Error in device matching. I had checked prior to the install that I...
View ArticleClik here to view.
Re: HDD click (excessive load-unload cycles)
I have forwarded the issue to the engineering department.I will let you know as soon as new information becomes available.We appreciate your patience in the meantime.
View ArticleRe: Suspected Compatibility issue between Datalogic Heron D130 barcode...
Robert , I also tried to disable usb 3.0 from bios, but no success ,Tried with usb cable extention no success. Thinking of H/W incombatibility, and i also think that maybe another usb device maybe...
View Article