Clik here to view.
Re: RAID 1 - FAILED
RAID failed status usually means, the structure and data are no longer available. Since this is RAID 1, you can recreate RAID by resetting disks to Non RAID and use Intel(R) Matrix Storage Manager to...
View ArticleRe: Hello. Could you please make a driver for Bay Trail for old good Windows...
Hello Dark_Timur, I regret to say that the support for Windows XP has ended now. The only Operating Systems that are supported for bay trail are Windows 7, Windows 8 and Windows 8.1. I will pass the...
View ArticleRe: Hello. Could you please make a driver for Bay Trail for old good Windows...
Hello. Thanks for reply. Actually I thought my request will be ignored. I'm asking because of there are some low-tech notebooks based on this hardware. Please don't forget to reply about results of the...
View ArticleRe: Windows not booting, main partition/drive not appearing in Disk/Volume...
Hello DerPhysiker, Based on your description and the image information it seems the HDD could have failed. As much as we can do at this point is trying to disconnect the HDD and reconnected back in. If...
View ArticleRe: IRST - Changing volume type from recovery to 2-disk RAID 1
As above, SATA controller was set to RAID mode in BIOS and two drives were connected to the SATA controller, however Ctrl + I during POST did not open Intel RAID Option ROM. This was resolved by...
View ArticleRe: Windows not booting, main partition/drive not appearing in Disk/Volume...
Thanks Kevin, That's what I feared. Unfortunately disconnecting and reconnecting the HDD did not improve the matter. Looks like it's time to contact HP.
View ArticleFailed Windows 7 on Intel Z97 Chipset Raid
Hi, I've Gigabyte board which has Z97 chipset. And have configured raid 5 with tree 2 tb disks.I saw tree 2 tb tisks without RST raid driver after that I have load raid driver and got raid disk but...
View ArticleClik here to view.
Re: Cannot keep existing data on a disk when creating Raid 1 volume with IRST ?
Pictures as promised.Using latest Intel® Rapid Storage 13.3, RAID mode enabled in BIOS, Migrate RAID ready to RAID 1. Step 1: Manage Step 2: Select RAID volume typeStep 3: Select drives Step 4:...
View ArticleClik here to view.
Re: Is it possible to do an in place HDD upgrade on RAID5
It is possible. You will need to rebuild after replacing each drive.You can use Windows* Disk Management to increase the volume size as explained in the Help section of Intel® Rapid Storage Technology;...
View ArticleRe: Failed Windows 7 on Intel Z97 Chipset Raid
This answer may be useful to someone in the futureThis is very simple and foolish. Problem is not chipset problemRe-insert the Windows 7 CD and refresh the drives...all the drives become available for...
View ArticleClik here to view.
Re: Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2
Hi Kevin I use Windows 7 64bit and I receive an update for the followingIntel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD GraphicsDownload...
View ArticleClik here to view.
Re: Cannot keep existing data on a disk when creating Raid 1 volume with IRST ?
Hello Allan, thanks for your pictures. I have downloaded and installed the latest IRST version which is 13.6.0.1002. I do not see any 13.3 IRST as you mentionned for download on the Intel...
View ArticleRSTe Setup - Unable to select more that 4 disks
I have a S2600GZ/GL Server System with an S2600GZ motherboard (C602 Chipset). I have installed an RKSATA8 key installed. The issue I have is that I cannot select more than 4 disk drives when setting up...
View ArticleRe: Cannot keep existing data on a disk when creating Raid 1 volume with IRST ?
Sorry about that, the version is 13.6 (it was a mistake)This file available here: File name:SetupRST.exe Allan.
View ArticleClik here to view.
Re: Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2
The update you are trying to install is from Windows updates. My recommendation is to try the latest driver we...
View ArticleRe: Failed Windows 7 on Intel Z97 Chipset Raid
Thank you for sharing this information. Kevin m
View ArticleRe: Cannot keep existing data on a disk when creating Raid 1 volume with IRST ?
Hello Allan, my last message stipulated I had downloaded and installed the 13.6.0.1002 version. I am not sure why you are pointing me to the same file. As shown in the snapshots above I...
View ArticleUSB 3.0 + Asus Z97-AR
I have had these drivers installed for a few months now( https://downloadcenter.intel.com/download/24503/USB-3-0-Intel-USB-3-0-Driver-for-Intel-NUC ), and cannot get any info on whether or not these...
View ArticleRe: USB 3.0 + Asus Z97-AR
Can those drivers be used on an Asus Z97-AR + i7-4790k? Intel lises them for 'NUC', but on other NUC drivers it says Intended for Intel NUC use ONLY. Many sites host this same USB 3.0 drivers...
View ArticleRe: USB 3.0 + Asus Z97-AR
Can any Intel staff please respond to my post? I cannot find clarification anywhere on the internet in regards to this subject.
View Article