Quantcast
Channel: Intel Communities: Message List - Chipsets
Browsing all 9016 articles
Browse latest View live

Re: How to upgrade the OROM drivers?

@ Paolo:Are you able to enter the BIOS at all?If not, I recommend to reflash temporarily (until we find a better solution) the last original BIOS, which was good for your system.Which Intel RAID ROM...

View Article


Re: How to upgrade the OROM drivers?

Well, I was ready ro reflash the original BIOS, but the machine doesn't start at all ..... Where is the EPROM BIOS phisically located? Paolo

View Article


Re: How to upgrade the OROM drivers?

Paolo schrieb:I was ready ro reflash the original BIOS, but the machine doesn't start at all .....Then you have done something wrong. Are you sure, that the BIOS, which you tried to flash, was designed...

View Article

I have am i915P/i915G chipset and want to upgrade my cpu

my pc is a dell optiplex GX 280 small desktop. The stock cpu is an intel pentium 4 520 2.8ghz 1m 800fsb 04A. I recently purchased a pentium 4 660 3.6ghz 2m 800fsb 04B. and when I installed it it said...

View Article

Re: Does the 5000X MCH as implemented in the MacPro1,1 support Quad-Rank DIMMs?

Really?  No one on the Intel site knows this information about an Intel chipset??? I also contacted the Intel support mail and no answer there yet either? What gives?

View Article


Rapid Storage Technology -- can't create RAID5 in Win7 Ultimate

I have an HP HPE-490t on which I have always had a 2-disk RAID1 array with 2x1 TB disks. To improve performance I wanted to add a third drive and change to RAID5, which the documentation with RST said...

View Article

Re: Does the 5000X MCH as implemented in the MacPro1,1 support Quad-Rank DIMMs?

Hello Tesselator, Please note that based on an agreement between Intel® and Apple, all the information, support and warranty will be provided by apple directly. At this point, I am afraid that you will...

View Article

Re: Does the 5000X MCH as implemented in the MacPro1,1 support Quad-Rank DIMMs?

Thank you for your reply. OK, well, just skip the whole MacPro implementation thing.  Does the 5000X MCH support quad rank DIMMs in any system?

View Article


Re: Does the 5000X MCH as implemented in the MacPro1,1 support Quad-Rank DIMMs?

Hello Tesselator, Please note that the support that is provided through the Forum page is for desktop computer only.  It is important to mention that the chipset limitations are set by the system...

View Article


Re: Rapid Storage Technology drivers for Windows server 2012

It's curious that Version 11.6.0.1030 (released on 09/13/2012) states that it supports the following operating systems:   Operating Systems:  Windows Server 2008 *, Windows 7 *, Windows 8*, Windows...

View Article

Re: Rapid Storage Technology -- can't create RAID5 in Win7 Ultimate

Hi Jonathan, I see you have a backup of your RAID 1 volume. What you can do is to access the RAID BIOS by pressing Ctrl+I during POST and then reset all disks to non-RAID.  After that you can create...

View Article

Re: Rapid Storage Technology drivers for Windows server 2012

At this moment the latest server operating system supported is Windows* 2008 server edition as stated in the release notes

View Article

Re: 3 simultaneous monitors (vga, dvi, hdmi onboard) with Z77 + 3rd gen i5 3570k

Hi, is there a splitter/hub I can use to connect 3 DP1.1 monitors to a single DP1.1 port on the Intel HD Graphics 4000?  Thanks

View Article


Image may be NSFW.
Clik here to view.

Re: Rapid Storage Technology drivers for Windows server 2012

Understood. And yet when you search downloads for RST and filter by Windows Server 2012, you get 6 results, which include: IRST: Intel® Rapid Storage Technology (Intel® RST)Available Downloads(Which...

View Article

Re: Rapid Storage Technology -- can't create RAID5 in Win7 Ultimate

Thanks, Fred. All disks are currently set to non-RAID. When I go into the RAID BIOS, I can create a new array, but only RAID 0 or 1. I don't see any option of Intel Rapid Recovery (or similar sounding...

View Article


Re: Rapid Storage Technology -- can't create RAID5 in Win7 Ultimate

Hi Jonathan, Another troubleshooting step you can perform is updating the BIOS of the motherboard.  You can find BIOS updates on this link http://www8.hp.com/us/en/support-drivers.html. If the issue...

View Article

Re: Rapid Storage Technology drivers for Windows server 2012

Thank you for your feedback on this, I will forward it to the appropriate team to this to match the release notes of the software.

View Article


Re: 3 simultaneous monitors (vga, dvi, hdmi onboard) with Z77 + 3rd gen i5 3570k

At this moment we do not have a list of tested cables that could be used for something like that. As you may know, these kind of devices may or may not work. Furthermore, in these kind of devices, the...

View Article

Re: Rapid Storage Technology -- can't create RAID5 in Win7 Ultimate

Hi Fred, Thanks again for the help. BIOS seems to be the most current version on the HP site, so no luck there. I have a message into them to see if there's a reason on their end that RAID5 would be...

View Article

Re: IRST 11.7 interface crashing.

Just tried the newly released IRST v12.5.0.1066.No improvement, same problem as before. ("Assertion Failed" error, followed by "Unknown Error" in the software) Is this ongoing issue caused by an...

View Article
Browsing all 9016 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>